|
Step-By-Step
Ordering Instruction
So....you've
decided you like SpecRail's aluminum fencing. Great! Now, the question is, "How much fencing do I
need?" and, "How do I determine what components I need and how many of each component(s) do
I need." We highly recommend purchasing our Fence Design Software. It's only $29.95 and
will save you countless hours of drawing, doing the math, etc. Click
Here for more information on Do-It-Yourself Fence Design
software. It you decide not to use the software, keep reading. Even if you use the software, the
following step-by-step instructions are a useful checklist!
|
Most
of this work is usually done by a fence contractor. But, because you have decided to be a
"do-it-yourselfer" you do this preliminary work and you will save a significant
amount of money! |
Step 1 -
Sketch Your Plan
Start off with
drawing a sketch of your fence on a piece of paper including measurements as you go. For best results,
we recommend using graph paper and drawing the sketch to scale but a rough draft is sufficient if you
have experience with these types of projects. Once the sketch with measurements is completed, mark
where each corner post, end post, and gate post will be located. Now it's time identify your line
posts. In ordering 6 ft ( 42in ) width panels, your line posts should be marked every 6 ft on your
sketch. Finally, mark where the gate(s) will be located. Your sketch plan is complete so let's figure
your order.
Step 2 -
Figure Your Order
Count the
number of corner posts, end posts, line posts, and gate posts separately and record the total of each
one. We recommend two gate posts with a single gate to increase the sturdiness to both sides. Double
gates require at least two gate posts.
Residential grade panels are available in 6 ft width only. Divide each run by the width 6 to determine
how many you need. For example, if you have one straight run of 60 ft and a second straight run of 30
ft, calculate as follow. Divide the 60 ft run by a 6 ft panel which equals 10 panels. Then, divide the
30 ft run by a 6 ft panel which equals 5 panels. 10 panels + 5 panels = 15 total 6 ft panels. If your
fence line divided by "6" is not even, round up. Another words, if your fence line is 64'
you would divide 64 by 6 = 10.6. You would order 11 panels. Then, when you install your panels you
will cut one fence panel. Detailed instruction on how to do this is included in your installation
manual which will come with your fence order.
How tall do you
want your fence? Several heights are available ranging from 3 foot to 6 foot panels. Record the number
of panels and the height you selected.
Be sure the width measurement of your gate(s) was not included when figuring the total number of
panels. Gates are ordered separately which leads us to where we are now. Both single gates and double
gates are available. Single gates are available up to 16 foot and may be used as both walkway and
driveway gates. Double gates are essentially two single gates and available up to 20 foot but please
note that the hardware does differ between a single and double gate. All the required hardware is
included with each gate order and the hardware will be defined by whether you order a single or double
gate. Take this time to calculate the number of gates your need. If you have a 6 foot space for a
gate, you could order a 6 ft single gate or a 6 ft double gate. Do you want a fence gate that is
taller than your fence panels? Please note the height difference if so.
Time for accessories. Do you want finials for your panels or ball caps for your posts? Browse our
fence accessories to see the various accessories Our Customer Service Representatives are available
for you to call with any questions you might have. Just call us at 800-987-4337. To determine the
number of accessories to order, refer to the chart provided on each individual accessory page.
For example, view the finials fence accessory.
The final piece to the puzzle is the color of your fence. What color blends in well with the
landscaping surrounding the fence area? Several colors are available including black, white, bronze,
green, and sandstone. Click Here to see samples.
Decide on a color and move on to placing your order.
Step 3 -
Placing Your Order
-
Go to the Product Overview page and select one of the 11 styles of SpecRail Aluminum fencing.
-
If you have question on pricing, go to the Pricing section.
-
If you plan to have any gates, go the the Gates Product page. All gates are available to match all of the fence styles offered.
-
Select the
color of your fence order. Choices include white, black, bronze, hunter green and sandstone. To
see samples of these colors, Click Here.
-
Once all
your questions are answered and you know the style, color and prices of your order, go to the Shopping
Cart where you can place your order. First, you will
order the fence section. Next order any gates you want. In addition, select any accessories you want with your fence order. These include Ball Caps, Finials and
Decorative Rings.
-
If you have
any questions during the ordering process, contact Customer Service at 1-800-987-4337.
-
Once you
complete your order a Customer Service Representative will contact you by phone or email to
confirm your order.
|
